How to support older Operating Systems in Hyper-V

Microsoft officially supports many of its own Operating Systems from the past, as well as some third party Operating Systems, in Hyper-V. For a complete list from Microsoft, click here. From time to time, I have a student in class that still needs to support Windows NT 4.0. NT4 is not on the list of supported guest operating system for Hyper-V. You can get it to work though.

When you create the VM in Hyper-V, open its Settings.

Click Processor.

Notice at the bottom the setting for Run an older operating system, such as Windows NT.

Even with this option enabled, Windows NT4 is not supported by Microsoft in a Hyper-V environment. You need to thoroughly test your implementation to make sure the results are acceptable.

Comments

Sticky Key problem between Windows Server 2012 and LogMeIn

This week I instructed my first class using Windows Server 2012 accessed via LogMeIn and discovered a Sticky Key problem every time you press the Shift key. Here is my solution to resolve this. First off, in the Preferences of LogMeIn for the connection to the Windows Server, click General . Change the Keyboard and mouse priority to Host side user and click Apply at the bottom. On the Windows 2012 server, open the Control Panel – Ease of Access – Change how your keyboard works . Uncheck Turn on Sticky Keys . Click Set up Sticky Keys . Uncheck Turn on Sticky Keys when SHIFT is pressed five times . Click OK twice. If you are using Windows Server 2012 as a Hyper-V host, you will need to redo the Easy of Use settings on each guest operating system in order to avoid the Sticky Key Problem. Updated Information: March 20, 2013 If you continue to have problems, Uncheck Turn on Filter Keys .

How to list all the AD LDS instances on a server

AD LDS allows you to provide directory services to applications that are free of the confines of Active Directory. To list all the AD LDS instances on a server, follow this procedure: Log into the server in question Open a command prompt. Type dsdbutil and press Enter Type List Instances and press Enter . You will receive a list of the instance name, both the LDAP and SSL port numbers, the location of the database, and its status.

How to run GPResult on a remote client with PowerShell

In the past, to run the GPResult command, you would need to either physically visit this client, have the user do it, or use and RDP connection. In all cases, this will disrupt the user. First, you need PowerShell remoting enabled on the target machine. You can do this via Group Policy . Open PowerShell and type this command. Invoke-Command –ScriptBlock {GPResult /r} –ComputerName <ComputerName> Replace <ComputerName> with the name of the target. Remember, the target needs to be online and accessible to you.

Jason Yoder, MCT

Search This Blog