Skip to main content

DFSR Migration for RODC is stuck

By

During a DFSR sysvol migration on Windows Server 2008, problems can occur with the migration of Read Only Domain Controllers.

See the image below.

image

The RODC is stuck trying to move to the Prepared state.  First go to the RODC and type Repadmin /SyncAll /AeD.

 

On the PDC Emulator, run dfsrmig /GetMigrationState.

If the migration completed, continue on.  If not type dfsrmig /CreateGlobalObjects. This will manually create the global objects for DFS replication.

On the PDC Emulator, run dfsrmig /GetMigrationState. You should be ready to move on to the next step in the migration process.

Labels:

Comments

AlexG said…
RODC in perimeter network was stuck as mentioned, however the repadmin and dfsrmig commands did not get things moving. Turned out to be an issue with the firewall protecting the RODC. Allowed full access between the RODC in the perimeter network and all other domain controllers, and the migration moved right along. Saw a lot of activity over ports 49204, 49155, 49156, etc. after I opened things up. Planning to change the firewall back after this finishes, and try to restrict DFSR replication traffic to specific ports only.
February 16, 2012 at 7:07 AM
Post a Comment

Popular posts from this blog

How to run GPResult on a remote client with PowerShell

By
In the past, to run the GPResult command, you would need to either physically visit this client, have the user do it, or use and RDP connection.  In all cases, this will disrupt the user.  First, you need PowerShell remoting enabled on the target machine.  You can do this via Group Policy . Open PowerShell and type this command. Invoke-Command –ScriptBlock {GPResult /r} –ComputerName <ComputerName> Replace <ComputerName> with the name of the target.  Remember, the target needs to be online and accessible to you.
Post a Comment
Read more

Set up your Environment to utilize Invoke-GPUpdate

By
I’m sitting in O’Hare enjoying my 3 hour layover as I get ready to teach a Windows 10 class in Fort Wayne.  I’m actually prepping for my class in Fort Wayne in a few weeks, 10982 Supporting and Troubleshooting Windows 10.  This class is very much like the Windows 7 version that I used to teach so I decided to up the detail quite a bit.  In the GPO troubleshootin chapter, I’m including a demonstration on how to use PowerShell’s Invoke-GPUpdate.  I needed to make sure the environment is set up for me to be able to utilize this cmdlet.  If you read the Notes section on Invoke-GPUpdate’s help file, you will see there are three firwall rules that need to be in place:          Remote Scheduled Tasks Management (RPC)          Remote Scheduled Tasks Management (RPC-ERMAP)          Windows Management Instrumentation (WMI-IN) I decided to create a little PowerShell script to crea...
Post a Comment
Read more

Sticky Key problem between Windows Server 2012 and LogMeIn

By
This week I instructed my first class using Windows Server 2012 accessed via LogMeIn and discovered a Sticky Key problem every time you press the Shift key. Here is my solution to resolve this.  First off, in the Preferences of LogMeIn for the connection to the Windows Server, click General . Change the Keyboard and mouse priority to Host side user and click Apply at the bottom. On the Windows 2012 server, open the Control Panel – Ease of Access – Change how your keyboard works . Uncheck Turn on Sticky Keys . Click Set up Sticky Keys . Uncheck Turn on Sticky Keys when SHIFT is pressed five times . Click OK twice. If you are using Windows Server 2012 as a Hyper-V host, you will need to redo the Easy of Use settings on each guest operating system in order to avoid the Sticky Key Problem. Updated Information: March 20, 2013 If you continue to have problems, Uncheck Turn on Filter Keys .
6 comments
Read more